The RF5-E30 Photoluminescent Anodized Flat Stair Nosing provides step edge visibility and enhances egress speed in all light conditions. It provides an affordable way to renovate and modernize worn stairways and improve stairway safety. The RF5-E30 can be used on a range of substrates including concrete, timber, tiles, steel and checker plate stairs.
Engineered for Durability
Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.
For Indoor Use and Outdoor Use
Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.
Step Edge Safety
The colour contrasting the non-slip material with advanced photoluminescent technology provides step edge visibility in all light conditions.
The unique ridges in the Ecoglo® photoluminescent strips and the integrated anti-slip contrast strips provide all-weather slip resistance.
Install with polyurethane adhesive and mechanical fasteners, or adhesive only.
Supplied with pre-drilled countersunk holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2″ from each end and approx. 12″ apart.
Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
Inserts are supplied unattached. Inserts are installed over the mechanical fasteners using a polyurethane adhesive (included). Inserts can be cut using a shear. Aluminum nosings are cut with a saw. Cutting inserts with saw will damage the saw blade.
Weight: 1.129 lbs/ft.
Available in Clear Anodized Aluminum Finish
Black, Light Bronze and, Dark Bronze Anodize finishes are available at an additional cost.